Tool Guides

Best Cordless Drill Kits for Home Use: 4 Top Brands Compared

By Hods Published · Updated

For a home owner buying a first drill with no existing batteries, the DeWalt DCD794D1 is the compact kit to price first. The Bosch GSB18V-65B12 is the one to choose if hammer mode for brick and block matters. The Milwaukee 3403-22 and Makita XFD131 make the most sense for people who already own, or plan to build around, the M12 or 18V LXT battery systems. All four are brushless, all four have a 1/2-inch chuck, and all four are drill/drivers rather than impact drivers. The specifications below are each manufacturer’s own, as published in November 2026.

None of the four manufacturers prints a price on its product page, so the price depends on the retailer and on exactly what is in the box. A listing with a similar name can be the bare drill without a battery or charger, so match the full kit number before comparing prices.

Spec table: four kits side by side

DeWalt DCD794D1Milwaukee 3403-22Bosch GSB18V-65B12Makita XFD131
Battery system20V MAX (18V nominal)M12 (12V)Bosch 18V (AMPShare)18V LXT
Batteries in kitOne 2.0Ah (DCB203)One 2.0Ah (CP2.0), one 4.0Ah (XC4.0)One 2AhOne 3.0Ah (BL1830B)
Maximum torqueNone listed; rated 404 UWO400 in-lb575 in-lb440 in-lb (50 N-m)
No-load speedUp to 1,650 rpm0-1,550 rpm, 2 speeds0-2,100 rpm, 2 speeds0-500 and 0-1,900 rpm
Hammer modeNoNoYes, 0-27,000 bpmNo
Clutch settings151220Not stated
Length5.88 in (head only)5.95 in6.9 in6-5/8 in
WeightNot listed for the drill alone2.5 lb with battery; 2.1 lb without2.5 lb (battery not specified)3.6 lb (features list) or 3.8 lb (specs list), both with battery
Chuck1/2-in ratcheting1/2-in all-metal1/2-in keyless, all-metal1/2-in
Manufacturer warranty3 years, plus 1 year free service and 90-day satisfaction guarantee5 years tool and charger; batteries 3 years (XC4.0) and 2 years (CP2.0)5 years tool and charger, 3 years battery3 years on tool, battery and charger
Also in the kitDCB107 charger, belt hookCharger, contractor bagCharger, belt clip, bagDC18SD charger, tool bag

Sources for each column: DeWalt, Milwaukee, Bosch, Makita. Milwaukee’s speed, clutch, weight and charger-warranty figures are in the Specs tab of its product page, and its tool and battery warranty periods are in Milwaukee’s limited warranty terms. DeWalt lists no torque figure and no weight for the drill itself; the only weight in its spec list, 4.95 lb, is given for the five-piece kit. Makita gives no clutch count. Milwaukee’s and Makita’s weights include a battery, while Bosch’s page does not say whether its 2.5 lb does.

Verdict by buyer

If you areLook first atWhy
Starting from nothing, mostly hanging shelves and assembling furnitureDeWalt DCD794D1DeWalt describes it as its shortest 20V MAX drill/driver, at 5.88 inches, with battery and charger in the kit
Drilling into brick, block or mortar now and thenBosch GSB18V-65B12The only hammer-mode tool of the four, with the highest published torque (575 in-lb) and a 5-year tool warranty
Already owning M12 toolsMilwaukee 3403-22Two batteries (2.0Ah and 4.0Ah) in the box, a 5-year tool warranty, and a listed 2.5 lb with battery
Already owning 18V LXT tools, or wanting the biggest tool range to grow intoMakita XFD131A 3.0Ah battery, larger than the 2.0Ah packs in the DeWalt and Bosch kits, and access to the LXT range of 350+ products

The Bosch’s 575 in-lb is the highest torque figure in the table. For household wood screws and pilot holes, battery platform, size and kit contents usually decide the purchase.

Battery platforms: the long-term decision

Buying a kit also means buying into a battery system, because each brand’s batteries fit that brand’s tools.

  • DeWalt 20V MAX. DeWalt’s page states that 20 volts is the maximum initial battery voltage, measured without a workload, and that the nominal voltage is 18. A “20V” DeWalt and an “18V” Bosch or Makita are therefore the same class of battery on paper. The page advertises swapping batteries among more than 300 tools in the 20V MAX system, and the kit’s DCB107 charger is listed as a 12V/20V MAX charger.
  • Milwaukee M12. The 3403-22 uses 12V batteries, a smaller class than the other three kits, and its 5.95-inch length is among the shortest in the group. Milwaukee’s page puts the M12 system at more than 125 tools, against the 300+ DeWalt claims for 20V MAX and the 350+ Makita claims for LXT.
  • Bosch 18V. Bosch’s page lists one 18V lithium-ion 2Ah Standard Power battery with the charger and bag. It also says Bosch 18V batteries and chargers belong to the AMPShare system, so they work with Bosch 18V tools and “a growing list of cordless products from AMPShare brands.”
  • Makita 18V LXT. Makita’s LXT page says all LXT products use the same batteries and chargers, lists 350+ products as of 2026, and calls LXT the world’s largest compatible cordless tool system powered by 18V slide-style batteries. That is Makita’s own claim, not an independent count.

If you already own batteries in one of these systems, buying the drill alone avoids paying again for a battery and charger. DeWalt lists the tool-only DCD794B beside the kit, Milwaukee lists the bare 3403-20 as its own product, and the drill inside Makita’s kit is the XFD13Z.

What brushless means, and what the pages claim

A brushed motor uses carbon brushes, which Milwaukee’s warranty terms list among the parts that normal use wears out. Makita’s XFD131 page says its Makita-built brushless motor eliminates carbon brushes, so it runs cooler and more efficiently for longer life. DeWalt lists the DCD794’s motor type as brushless, and a feature bullet claims up to 16 percent more power than the DCD771 when both use the DCB203 battery. Milwaukee’s page names a POWERSTATE brushless motor and says it “delivers the power to complete the widest range of applications of any subcompact drill driver.” Bosch lists the GSB18V-65 as brushless.

Makita is the only one of the four to put a number on run time: it says the electronically controlled motor gives “up to 50% longer run time per charge,” without naming the tool it is compared with. All of these are manufacturers’ comparisons against their own earlier tools or a category they define, so they show direction rather than a ranking.

Reading the specifications correctly

  • Torque in in-lb versus UWO. Milwaukee, Bosch and Makita publish maximum torque in inch-pounds. DeWalt’s spec list for the DCD794D1 has no torque figure; instead its feature list says “Unlock power in a compact size with 404 UWO,” with a footnote that the rating is “based on using DCB203 battery.” Because 404 UWO is not an inch-pound figure, it cannot be ranked above or below the other three.
  • No-load rpm. This is the speed with nothing resisting the bit. Makita publishes both of its ranges, 0-500 and 0-1,900 rpm. Milwaukee and Bosch each list two speed settings, with top speeds of 1,550 and 2,100 rpm, and DeWalt lists up to 1,650 rpm. Bosch says its two settings serve “both high-speed and high-torque applications.”
  • Hammer mode (bpm). Bosch lists up to 27,000 blows per minute. Tools in Action, a review site, says the tool can handle “light to moderate masonry like brick, block, and mortar using a standard masonry bit,” and that heavy-duty concrete calls for an SDS tool. That write-up, dated July 31, 2025, reports the manufacturer’s specifications and its author’s impressions; it publishes no measured torque or run time, and it discloses affiliate links.
  • Clutch settings. Bosch lists 20, DeWalt 15 and Milwaukee 12; Makita’s page mentions adjustable torque settings without giving a number. Bosch says its settings are “for driving accuracy and reduced fastener damage,” which is why the clutch matters for furniture and cabinet screws.
  • KickBack Control. Bosch’s page says this switchable feature reduces the risk of sudden rotational reaction when the bit binds, and that it can be turned off.
  • Chuck. All four are 1/2-inch. DeWalt’s is ratcheting, and Bosch and Milwaukee list all-metal chucks.

How much does the DeWalt DCD794 weigh?

DeWalt does not publish a weight for the drill itself. GearLab, a review site that says it buys the products it tests, lists the DCD794D1 as the kit it tested for an August 2025 review and reports a measured weight of 3.2 lb with battery. That figure is GearLab’s measurement, not a DeWalt specification. For comparison, Milwaukee lists 2.5 lb with battery for its drill, and Makita 3.6 to 3.8 lb with battery.

Drill or impact driver?

All four kits here are drill/drivers: they drill clean holes and drive screws with a clutch. An impact driver adds rotational hammering for long fasteners. For general household work the drill comes first; see Drill vs. Impact Driver for the reasoning. If the drill is for a bench or shelving project, Build Your First Workbench gives a project to size the purchase against, and the Workshop Cost Guide helps put the tool next to the rest of the budget.

Checklist before ordering

  1. Write down the first three jobs: material, hole diameters, screw lengths, and whether any hole goes into masonry.
  2. Choose the battery system from the tools you want in five years, not from the drill alone.
  3. Match the kit number (for example DCD794D1 or 3403-22) to the listing, and check it includes a battery and charger.
  4. Compare length and weight for the spaces you work in; Makita lists the highest weight of the four, 3.6 to 3.8 lb with battery.
  5. Compare warranty terms: Bosch and Milwaukee give 5 years on the tool and charger, DeWalt and Makita 3 years. Bosch and Makita cover the battery for 3 years, and Milwaukee gives 3 years on the XC4.0 and 2 years on the CP2.0.

Sources